Working with My Hands Brings Me Joy

« Back to Home

Tips To Remember When You Need To Seal Your Driveway Cracks

Posted on

Over time, your driveway can develop a series of small cracks that can reduce its visual appeal and even result in eventual structural damage. It's a smart idea to address these cracks promptly; if left unattended, they'll likely grow to the point at which you'll need a major repair job. You should plan to hire a driveway contractor to deal with any larger cracks, but if the cracks in your driveway are still in their early stages, it's worthwhile to buy a sealing supply kit at a local home improvement store, read the instructions carefully and tackle the project by yourself. Here are some tips that will make the sealing process easier.

Pick The Right Day

Make sure to consult the weather forecast carefully as you get ready to seal your driveway cracks. It's common sense to avoid performing this task when it's raining or there's a chance of rain later on in the day, but you should also wait until there's a day with full sunshine. Even though it might be hot working conditions, the heat of the sun will help the sealing solution form a strong bond, which is what you want when performing this job.

Identify Stained Areas

Spills from oil and other vehicular products can not only impact the look of your driveway, but also compromise its strength. Take some time to look for any stains on the driveway and then do your best to remove them with the appropriate cleaning solution, which you can also find at a home improvement store. When the stains are removed, check the condition of the asphalt underneath. Is it developing cracks, too? Your patient removal of the stains is an ideal early task because it can help to identify additional cracks that need your attention.

Apply The Sealing Solution In Small Doses

Sealing the driveway cracks isn't a job you should attempt to hurry through. You'll get better results by being patient -- namely, by applying the sealing solution slowly and methodically. Don't simply start forcing the compound into the cracks. Do your best to remove any loose gravel or other debris that is sitting in the deepest parts of the cracks and then apply the sealing solution slowly and methodically. Give it time to settle into the cracks. One effective strategy is to apply some of the solution to one crack, move to another and then another, and then return to repeat the process with the first crack. The break you give each crack allows time for the solution to sink in, which will give you a better finished product.

Contact a local crack sealing company, like Southwest Slurry Seal, Inc. or a similar location, for more tips and ideas.


Share